Showing all 7 results

Form Guard Slab Bolster

Form Guard Slab Bolster

The Form Guard Slab Bolster comes in sizes from 3/4” to 3” in height. Designed to be extremely strong and stable yet also able to work well in architectural applications, our bolster takes the industry to the next level. With the best fastener in the industry. Your crew will find this bolster easy to place and connect securely saving time and money. With our Form Guard leg tip design, you don’t have to worry about the bolster damaging your expensive forms. Available in both 10-foot lengths bundled on a pallet, or in 2-½ foot lengths in boxes, we make it easy to place your rebar instead of working with inadequate supports. See size chart below.

Application: Foundations, bridge decks, parking structures, tilt-up walls.
Cover Height: From 3/4″ to 3″
Features: Strong, excellent connection for part assembly, Form Guard tip design.

100% made in the USA

Plastics use 100% recycled material

Rebar HI-Chairs

HI-Chairs

The HI-Chairs range in size from 3” to 14” cover. Sizes 3” to 12 1/4” are dual sized in 1/4” increments. 12-1/2” and above are single cover size. See chart below. Designed to be extremely strong yet able to straddle a lower rebar mat, these chairs have a wide, stable base with a footprint that is designed to work well in architectural applications, yet able to carry very heavy loads and protect wood forms.

Our innovative “Z” top provides maximum strength and ease of use, while providing for ease of access when tying to rebar. The Z-tops also have large spacing between the legs for maximum concrete flow and consolidation, and large easy-to-read height markers.

Application: Bridge decks, parking structures, foundations, thick slabs, double rebar mats, heavy loads, and with a sand plate (sold separately) for on grade applications.
Cover Height: From 3″ to 14″
Features: Wide, stable base, straddles lower rebar mat, minimal footprint for architectural forms.

100% made in the USA

Plastics use 100% recycled material

ProTilt Chairs

ProTilt Chairs

The PROTILT Chair ranges in size from ¾” to 3” and are dual cover sized.

The extra wide footprint contributes to a sturdier and heavy-duty chair that stays in place better than lighter weight alternatives. The added support directly underneath the cradle provides additional strength. The footprint borrows elements from our slab bolster providing a best-case scenario for use on Formwork, Mud Slabs, and Tilt-Slab applications.

Application: Formwork. Mud Slabs and Tilt Slabs.

Features: Cover Heights from ¾” – 3”, Dual Cover Sized, Strong, Easy to Use, Accommodates Mesh to #11 Bar.

100% Made in the USA

Plastics use 100% recycled material

Tilt Chairs

Tilt Chairs

The Tilt Chairs come in sizes from ¾” to 6” cover. The ¾” to 3” are single sized. 3-1/4” and above are dual sized in ¼” increments. See chart below. These chairs have a wide, stable base with a footprint that is designed to work well in architectural applications, yet able to carry necessary loads and protect wood forms. They also have large spacing between the legs for easy tying to rebar, maximum concrete flow and consolidation, and large easy-to-read height markers.

Application: Tilt up buildings, precast, and with sand plate (sold separately) for on grade applications.
Cover Height: From 3/4″ to 6″
Features: Architectural footprint, light weight and easy to use.

100% made in the USA

Plastics use 100% recycled material

On-Grade Square Chairs

On-Grade Square Chairs

The On-Grade Square Chairs come in sizes 1 1/2” to 6 1/4” in height. Each chair has is dual sized in ¼” increments. See Chart below. These chairs have a wide, stable base designed to carry heavy loads in demanding on-grade applications. They also have large spacing between the legs for easy tying to rebar, maximum concrete flow and consolidation, and easy-to-read height markers.

Application: On grade
Cover Height: From 1 1/2″ to 6 1/4″
Features: Strong, stable, and easy to tie to rebar; light and easy to carry.

100% made in the USA

Plastics use 100% recycled material

Wheels

LOCKING WHEELS

Heavy Duty Plastic Locking Wheels range in sizes 1 ½” to 3” cover. The Improved zip tie is designed for ease of installation and a secure connection to reinforcing steel or mesh.

SPACE WHEELS

Plastic Space Wheels range in sizes ¾” to 3” cover. This unique design allows for use on typical rebar sizes as well as #2 or #3 mesh. Push on for secure compression fit to reinforcing steel or mesh.

Application: Foundations, bridge decks, parking structures, caissons, precast.

Cover Height: ¾” – 3”

Features: Strong, easy to use, secure connection, multiple bar sizes.

100% made in the USA

Plastics use 100% recycled material

Sand Plate

Sand Plate

The Sand Plate is designed to work with all of our chairs. Whether you’re using our HI-Chairs or Tilt Chairs in an on-grade application, our sand plate attaches easily and securely to our chairs and provides for large, stable base to ensure proper chair and rebar placement.

Application: On grade
Cover Height: All sizes.
Features:  Attached easily and securely to all sizes of our Hi Chairs and Tilt Chairs.

100% made in the USA

Plastics use 100% recycled material